-
Jul 09, 2022Characteristics Of Deep Groove Ball Bearings
It is mainly used to bear radial load, but when the radial clearance of the bearing is increased, it has a certain performance of angular contact ball bearing and can bear combined radial and axial... -
Jul 08, 2022Working Principle Of Deep Groove Ball Bearing
Deep groove ball bearings mainly bear radial load, and can also bear radial load and axial load at the same time. When it only bears radial load, the contact angle is zero. -
Jul 07, 2022Basic Parameters Of Deep Groove Ball Bearings
Deep groove ball bearings are the most common type of rolling bearing. The basic deep groove ball bearing consists of an outer ring, an inner ring, a set of steel balls and a set of cages. -
Jul 06, 2022Introduction Of Deep Groove Ball Bearings
Deep groove ball bearing (GB/T 276—2003) The original list of radial ball bearings is the most widely used type of rolling bearing. -
Jul 05, 2022Advantages Of Rolling Bearings
In general working conditions, the friction coefficient of the rolling bearing is small, it will not change with the change of the friction coefficient, and it is relatively stable. -
Jul 04, 2022Clearance Control Of Deep Groove Ball Bearings
For angular contact ball bearings, the clearance also determines its fatigue life. If the clearance is improperly selected, it is very easy to cause early failure of the bearing. -
Jul 03, 2022Bearing Clearance Of Ball Bearings
Bearing clearance (internal clearance) refers to the total distance that a bearing ring can move in a certain direction relative to another ring before the bearing is not installed with the shaft ... -
Jul 02, 2022The Use Of Ball Bearings
The purpose of a ball bearing is to determine the relative position of two parts (usually a shaft and a housing) and to ensure their free rotation, while transferring the load between them. -
Jul 01, 2022Structural Composition Of Ball Bearings
Ball bearings are mainly composed of four basic elements: ball, inner ring, outer ring and retainer, also called cage or retainer. General industrial ball bearings meet the AISI 52100 standard.